COMPANY HEADER
General's Sink Drain Cleaners offer you a complete system for cleaning drain lines from 1-1/4" through 3" in diameter. They're built to clear clogged drains for a decade or more. Our Dyna-Thrust™ bearing system is one reason why. It helps carry the weight of the drum, significantly reducing wear on the motor shaft bearing and extending the life of the tool. Of course the cables are Flexicore® - with an integral wire rope center. With a variety of cables, cutters and accessories available, you have the right combination for any clogged drain problem.
Request Information
Unit of Measure
Items
Super-Vee® Sink Drain Cleaner

Super-Vee® Sink Drain Cleaner
Power-Vee® Sink Drain Cleaner

Power-Vee® Sink Drain Cleaner with Case
Sink Drain Cleaners

Model DRZ-PH-B Sink Drain Cleaner
Description N/A The small line specialist.

For kitchen, bathroom, laundry drains, and lines up through 3" in diameter. The Super-Vee® has a patented Slide-Action Chuck built right into the grip shield. Just slide it back to grip the cable; forward to release it. Automatically adjusts for different size cables. 		N/A To feed the cable just start the Power-Vee® and squeeze the feed lever; to retract it, reverse the motor and squeeze the lever. The feed handles 1/4", 5/16" and 3/8" cables. No adjustment, disassembly, or additional parts required. N/A The variable speed power cable feed on the DRZ-PH gives you complete control as it feeds and retrieves the cable at up to 16 ft. per minute. The four foot guide tube means you never have to touch the cable so your hands, and the jobsite, stay clean.
Brands N/A Super-Vee® N/A Power-Vee® N/A
Width N/A N/A N/A 28 cm11 in.
Height N/A N/A N/A 38 cm15 in.
Weight without Cable N/A N/A N/A 30 lb13.6 kg
Depth without Hose N/A N/A N/A 20 in.51 cm
Width without Hose N/A
Height without Hose N/A
Chuck N/A Slide Action Chuck N/A Automatic Feed N/A Variable Speed Automatic Feed
Capacity1 N/A 35 ft. of 3/8 in. cable 50 ft. of 1/4 in. cable 50 ft. of 5/16 in. cable N/A 35 ft. of 3/8 in. cable 50 ft. of 1/4 in. cable 50 ft. of 5/16 in. cable N/A 35 ft. of 3/16 in. cable. 50 ft. of 1/4 in. or 5/16 in. cable
Motor Power N/A All ball-bearing, double-insulated, reversible motor with variable speed control. N/A All ball-bearing, double-insulated, reversible motor with variable speed control. N/A 1/5 hp
Motor Speed N/A 0 to 500 rpm N/A 0 to 500 rpm N/A
Motor Features N/A N/A N/A With forward-off-reverse switch, fuse protected
Motor Voltage N/A
Foot Pedal N/A N/A N/A Pneumatic foot pedal leaves operator's hands free to control cable
Motor Industry Standard N/A
Cable Cartridges N/A Light weight, impact resistant plastic. N/A Light weight, impact resistant plastic. N/A
Power Feed N/A N/A Feeds 3/8 in. cable at 16 feet per minute. N/A Variable Speed
Note for Power Feed N/A N/A N/A Drives 1/4 in. 5/16 in. and 3/8 in. cables.
Industry Standards N/A CSA Approved UL Listed N/A CSA Approved UL Listed N/A cULus Listed
Options N/A CAA (Closet Auger Attachment Guides) - 1/4 in. or 5/16 in. cable into bowl DHF (All-Purpose Down Head Fitting) - Can be used with all standard HECS cutters MCC Carrying Case N/A CAA (Closet Auger Attachment Guides) - 1/4 in. or 5/16 in. cable into bowl DHF (All-Purpose Down Head Fitting) - Can be used with all standard HECS cutters MCC Carrying Case N/A
Feeds and Retrieves the Cable at N/A
Cable Size N/A 25 ft. x 3/8 in. (25HE2) and 25 ft. x 1/4 in. (25HE1) N/A 25 ft. x 1/4 in. (25HE1-DH) 35 ft. x 3/8 in. (35HE2) N/A 50 ft. x 5/16 in. (50HE1-AC)
DRZ Economy Drain Cleaner N/A N/A N/A The less expensive DRZ uses a patented Quick-Grip™ chuck instead of the variable speed power cable feed, and the cable is housed in a tough impact resistant plastic drum.
Boxed Weight N/A 32 lb N/A 36 lb N/A
Flexicore® Patent Numbers N/A N/A N/A 2,244,735 2,849,870
Additional Information N/A N/A With power cable feed - works great in tight spots.

In tight or awkward places, the Power-Vee® is like having a third hand. To feed the cable, just start the Power-Vee® and squeeze the feed lever. To retract it, reverse the motor and squeeze the lever. It feeds 3/8 in. cables at 16 ft. per minute.

Our Dyna-Thrust® bearing system helps carry the weight of the drum, significantly reducing wear on the motor shaft bearing and extending the life of the tool. Also adding to the Power-Vee®'s durability is the heavy-gauge stamped aluminum drum. Of course the cables are Flexicore® - with an integral wire rope center. Nobody makes cables like General. 		N/A Looking for a cleaner way to clean drains? The Model DRZ is the answer Light and powerful for a machine of its size, the DRZ is ideal for clearing clogged sinks, tubs, and laundry drains in 1- 1/4 in. to 3 in. drain lines up to 50 ft. long.
DRZ-PH-B with 50 ft. x 5/16 in. (50HE1-AC) cable, and HECS cutter set.
Made in USA

Operate the machine horizontally on the kitchen counter or vertically on the floor next to the tub. The silent motor wont disturb your customers while on the job. Use the pneumatic pedal to keep your hands free to control the feed and guide hose.

The rust resistant aluminum drum carries up to 50' of 1/4 in. or 5/16 in., or 35' of 3/8 in. Flexicore® wire rope center cable. A quick change cartridge system allows you to switch to a different diameter cable without pulling the old cable out of the drum.

Weighing as little as 30 lbs. the light-weight machine is easy to handle. Use the carrying handle on top to carry to and from the job.
Features N/A N/A
  • Feeds 3/8 in. cable at 16 feet per minute.
  • The feed handles 1/4 in., 5/16 in. and 3/8 in. cables - no adjustment, disassembly or additional parts required.
  • Uses left hand wound Flexicore® cables for maximum strength.
  • With Quick-change cable cartridges.
 		N/A
Slide Action Chuck N/A Grip shield moves back to engage cable, forward to release it. Automatically adjusts for different diameter cables

With a quick movement of the Grip Shield, you release or engage the cable - without the need for a chuck, and with automatic adjustment for different cable diameters. As a result, you get your cable into the line faster, pull it out faster, and have full control at all times. Because the Slide Action Chuck is linked to the Grip Shield, handling is easy and comfortable. 		N/A N/A
Quick-Change Cable Cartridges N/A To switch to a different diameter cable (or even connect two 3/8 in. cables together), you just loosen three screws, pull the front of the drum off the cable, and load another cartridge. Changing takes less than a minute and turns what could be a messy job into a clean one. The tough plastic cartridges are so inexpensive, you'll probably want to store all of your Super-Vee® cables in them. N/A N/A
Flexicore® Cable N/A N/A N/A Heavy gauge wire is coiled around 49 strand wire rope and then heat treated. This cable has unequalled strength and the right amount of flexibility. It's so tough, it has a one year warranty against defect or breakage
Power Cable Feed N/A
Cutter Sets N/A 1-1/4 SCB - 1-1/4 in. Side Cutter Blade (2 piece set) AH - Arrow Head Starting Drill BG - Boring Gimlet DHBG - Down Head Boring Gimlet FAH - Flexible Spring Arrow Head Cutter N/A 1-1/4 SCB - 1-1/4 in. Side Cutter Blade (2 piece set) AH - Arrow Head Starting Drill BG - Boring Gimlet DHBG - Down Head Boring Gimlet FAH - Flexible Spring Arrow Head Cutter N/A Arrow Head Starting Drill
Part Number: AH
Application: Starting Drill (Gets water flowing)

Boring Gimlet
Part Number: BG
Application: For removing loose objects

Down Head Boring Gimlet
Part Number: DHBG
Application: For removing loose objects (Goes down waste, not up stack)

Flexible Spring Arrow Head Cutter
Part Number: FAH
Application: Starting Drill (For sharp turns in small lines)

1-1/4 Side Cutter Blade (2 piece set)
Part Number: 1-1/4 SCB
Application: For cutting and scraping
Basic Units Include N/A N/A
  • Power Cable Feed
  • Variable Speed Motor with Reverse Switch
  • Quick-Change Cable Cartridge
 		N/A
  • Aluminum Drum
  • Variable Speed Power Cable Feed
  • Four Foot Guide Hose
  • 1/5 hp Motor with Reverse Switch
  • Water-Proof Air Foot Switch
  • Quick Charge Plastic Cartridge
Features N/A
Note N/A 220/230 & 240 Volt/50 Hz and cordless units are available. N/A 220/230 & 240 Volt/50 Hz and cordless units are available. N/A
  • 1 All cables are left hand wound and reinforced with a wire rope center.