COMPANY HEADER
Request Information
To feed the cable just start the Power-Vee® and squeeze the feed lever; to retract it, reverse the motor and squeeze the lever. The feed handles 1/4", 5/16" and 3/8" cables. No adjustment, disassembly, or additional parts required.
Unit of Measure

Specifications

Brands

 N/A Power-Vee®

Chuck

 N/A Automatic Feed
Capacity1 N/A 35 ft. of 3/8 in. cable 50 ft. of 1/4 in. cable 50 ft. of 5/16 in. cable

Motor Power

 N/A All ball-bearing, double-insulated, reversible motor with variable speed control.

Motor Speed

 N/A 0 to 500 rpm

Cable Cartridges

 N/A Light weight, impact resistant plastic.

Power Feed

 N/A Feeds 3/8 in. cable at 16 feet per minute.

Industry Standards

 N/A CSA Approved UL Listed

Options

 N/A CAA (Closet Auger Attachment Guides) - 1/4 in. or 5/16 in. cable into bowl DHF (All-Purpose Down Head Fitting) - Can be used with all standard HECS cutters MCC Carrying Case

Cable Size

 N/A 25 ft. x 1/4 in. (25HE1-DH) 35 ft. x 3/8 in. (35HE2)

Boxed Weight

 N/A 36 lb

Additional Information

N/A With power cable feed - works great in tight spots.

In tight or awkward places, the Power-Vee® is like having a third hand. To feed the cable, just start the Power-Vee® and squeeze the feed lever. To retract it, reverse the motor and squeeze the lever. It feeds 3/8 in. cables at 16 ft. per minute.

Our Dyna-Thrust® bearing system helps carry the weight of the drum, significantly reducing wear on the motor shaft bearing and extending the life of the tool. Also adding to the Power-Vee®'s durability is the heavy-gauge stamped aluminum drum. Of course the cables are Flexicore® - with an integral wire rope center. Nobody makes cables like General.

Features

N/A

  • Feeds 3/8 in. cable at 16 feet per minute.
  • The feed handles 1/4 in., 5/16 in. and 3/8 in. cables - no adjustment, disassembly or additional parts required.
  • Uses left hand wound Flexicore® cables for maximum strength.
  • With Quick-change cable cartridges.

Cutter Sets

N/A 1-1/4 SCB - 1-1/4 in. Side Cutter Blade (2 piece set) AH - Arrow Head Starting Drill BG - Boring Gimlet DHBG - Down Head Boring Gimlet FAH - Flexible Spring Arrow Head Cutter

Basic Units Include

N/A

  • Power Cable Feed
  • Variable Speed Motor with Reverse Switch
  • Quick-Change Cable Cartridge

Note

N/A 220/230 & 240 Volt/50 Hz and cordless units are available.

  • 1 All cables are left hand wound and reinforced with a wire rope center.