Brands |
N/A Rodrunner® |
Weight |
N/A 185 lb84 kg |
Width |
N/A 29 in.74 cm |
Length |
N/A 44 in.112 cm |
Height |
N/A 40 in.102 cm |
Motor Power |
N/A 6-1/2 hp gas engine. |
Cables |
N/A Cat # 10GP - 10 ft x 1-1/4 in. (3 m x 32 mm) with G-Connector for 3 in. to 10 in. (75 mm - 250 mm) lines. Cat # 2MSR or 3MSR - 36 in. or 39 in. x 5/16 in. (.9 m or 1 m x 9.5 mm) Municipal Rods for 4 in. to 24 in. (100 mm - 600 mm) lines. Cat # 8LP or 10LP - 8 ft or 10 ft x 1-1/4 in. 2.4 m or 3 m x 32 mm) with L-Connector for 3 in. to 10 in. (75 mm - 250 mm) lines. |
Engine |
N/A 6.5 hp Briggs and Stratton 4 cycle with throttle on handle |
Transmission |
N/A Snow and Nabstedt reversing "hot-shift" transmission drives 3/4 in. lifetime lubricated roller chain. No clutch or throttle needed. |
Speed Range |
N/A From 100 rpm to 200 rpm for municipal rods; 200 to 400 rpm for sectional cables. |
Slip Clutch |
N/A Protects against excessive torque being applied to cable or rods. Easily adjustable. |
Coil Spring Sections |
N/A 1-1/4 in. x 10 ft. long with inner spring to handle torque better than hollow cables. |
|
N/A
It's driven by a powerful 6.5 hp engine with an easily accessible throttle control on the handle. Drive speed is set at 100 to 200 rpm for municipal rods, and 200 to 400 rpm for sectional cables. |